ENTREXGUARD
Retail Security Closures
Retail Security Closures
Elegance In Merchandising
your retail premises 24/7
your products while providing visibility
your assets and optimize space
Click On Each Part to Find Out More
No part is selected.
Click on a part and find out more!
The EntrexGuard axle is robust and heavy duty, fully up to the task of operating the large retail closures up and down for years, enduring daily wear and tear.
The axle is hidden out of sight and above the ceiling, providing for a clean looking retail security closure that coils up and disappears during business hours.
EntrexGuard shutters have two operation options: paddle switch or key switch. Both of these options allow you to open, close, or stop the shutter at any position.
The paddle switch is a low-profile option featuring a standard paddle switch design. This option allows you to operate the shutter either up or down by simply pressing the paddle.
The key switch offers great security by requiring a key to operate the shutter. Turning the key either direction will operate the shutter up or down; putting the key in the neutral position will stop the shutter.
There are two bottom bar options for EntrexGuard rolling shutters:
Each of these bottom bar options are used based on the curtain series being used and the strength required for your shutter. The bottom bars are constructed of extruded aluminum, with an attractive powder-coated finish with many color options. Multiple bottom bar locks are available to secure the shutter to the highest level.
The Standard Bottom Bar options provide a sleek, low profile design while maintaining a high level of security.
The Heavy Duty Bottom Bar is an extremely strong option used for application requiring the highest level of security.
There are seven guide rail options for DefendaGuard rolling shutters:
Standard Guide Rails provide immense strength with two size options used based on the curtain series needed.
AnchorLoc Guide Rails feature our end-retention system, providing an extreme level of strength for the shutter curtain, making it near-impossible to force the curtain out of the guide rails. This system consists of anchors that are attached to the curtain at regular intervals and fastened to the guide rails to prevent the curtain from potentially being forced out of the guide rails.
EntrexGuard shutters have two operation options: paddle switch or key switch. Both of these options allow you to open, close, or stop the shutter at any position.
The paddle switch is a low-profile option featuring a standard paddle switch design. This option allows you to operate the shutter either up or down by simply pressing the paddle.
The key switch offers great security by requiring a key to operate the shutter. Turning the key either direction will operate the shutter up or down; putting the key in the neutral position will stop the shutter.
Emergency egress is an optional safety feature for the EntrexGuard system. Emergency egress is activated by simply pulling the switch, and the shutter will quickly be released to allow safe exit or prevent injury.
The curtain of an EntrexGuard shutter is coiled up on an axle. The axle is hidden out of sight and above the ceiling, providing for a clean looking retail security closure that coils up and disappears during business hours.
Pentagon's EntrexGuard retail closures require very little space above the ceiling due to our extensive innovation of the curtain, allowing it to roll up into the smallest coil possible. This makes it mush easier to use EntrexGuard closures for both new and retrofit applications.
EntrexGuard closures are operated with a jackshaft motor. A jackshaft, also called a countershaft, is a common mechanical design component used to transfer or synchronize rotational force in a machine.
The jackshaft motor will rotate the axle, which brings the curtain up and coils it around the axle until it is in the open position, out of sight and above the ceiling.
There are 9 curtain series available for DefendaGuard shutters:
All curtain series are also available in any custom color desired.
There are seven guide rail options for DefendaGuard rolling shutters:
Standard Guide Rails provide immense strength with two size options used based on the curtain series needed.
AnchorLoc Guide Rails feature our end-retention system, providing an extreme level of strength for the shutter curtain, making it near-impossible to force the curtain out of the guide rails. This system consists of anchors that are attached to the curtain at regular intervals and fastened to the guide rails to prevent the curtain from potentially being forced out of the guide rails.
There are two bottom bar options for EntrexGuard rolling shutters:
Each of these bottom bar options are used based on the curtain series being used and the strength required for your shutter. The bottom bars are constructed of extruded aluminum, with an attractive powder-coated finish with many color options. Multiple bottom bar locks are available to secure the shutter to the highest level.
The Standard Bottom Bar options provide a sleek, low profile design while maintaining a high level of security.
The Heavy Duty Bottom Bar is an extremely strong option used for application requiring the highest level of security.
The EntrexGuard axle is robust and heavy duty, fully up to the task of operating the large retail closures up and down for years, enduring daily wear and tear.
The axle is hidden out of sight and above the ceiling, providing for a clean looking retail security closure that coils up and disappears during business hours.
DefendaGuard Rolling Security Shutters are Available with AnchorLoc
AnchorLoc is an end retention system that will dramatically improve the strength of your shutter and its ability to resist force.
AnchorLoc essentially secures the shutter curtain to the guide rails on each side, therefore allowing the curtain to resist very heavily against forces such as wind, storms, vandalism, and smash-and-grab-theft.
AnchorLoc consists of anchors secured to the curtain at regular intervals from top to bottom. These anchors slide into the guide rails that are designed especially for the AnchorLoc system, which dramatically improves the strength of the shutter and its ability to stand up to heavy forces against it. The anchors are constructed using heavy duty commercial-grade steel to ensure the most strength possible.
We Have a Large Dealer Network all Across North America! We can Always
Connect you with a Qualified and Experienced Dealer Near You.